Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1721)

Brocade Network Advisor SAN + IP User Manual 1649
53-1003155-01
IP configuration requirements
43
• IP historical performance monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1662
• IP Custom performance reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1681
• IP sFlow configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1688
• IP Traffic analyzer monitoring and sFlow reports . . . . . . . . . . . . . . . . . . . 1705
• IP traffic accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1722
IP configuration requirements
To be able to use SNMP Monitor for performance monitoring, make sure the following
requirements are met:
• Ensure that SNMP is enabled on the devices you want to monitor and that SNMP community
strings have been defined for set and get operations.
• Make sure discovery has been run and the devices appear on the Network Object Manager
tree. If a device is not on the tree, add the device using Network Object Manager.
• Define what data you want to collect.
• If you need to monitor devices within specific device groups, you must create the device
groups.
• You must have the SNMP Monitor privilege in your user account or role.
Management application comes with default MIB files, such as standard MIB and Brocade
proprietary MIB files.