beautypg.com

Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 2416

background image

2344

Brocade Network Advisor SAN + IP User Manual

53-1003155-01

Database tables and fields

I

MEDIA

media of port

varchar

64

IOC_ID

IO controller ID

int

PREBOOT_DISABLED

Boolean value indicating if port was disabled during
preboot.. The default value is 0.

smallint

ALARM_WARNING

A bit mask indicating degrading SFP if the bit mask
has any 1s in it. It bit mask is all 0s then SFP is in
good state.

varchar

32

IO_EXEC_THROTTLE_MAX

Maximum value is 2000. This feature is available for
driver 3.1 and later.

int

IO_EXEC_THROTTLE_OPER
ATIONAL

Operation value ranges from 0 - 2000.

int

IO_EXEC_THROTTLE_CONFI
GURED

Configured value ranges from 0 - 2000.

int

FEC_STATE

State of FEC. The FEC (Forward Error Correction) is an
error recovery mechanism that allows the receiver of
the corrupted frame to correct the error without
referring back to the port which transmitted the
frame. Supported on prowler card in FC mode.
Applicable values are Online, Offline and Not
Supported. Note : Not Supported on
(PORT_MEDIA_MEZZANINE_CARD).

varchar

128

BB_CREDIT_RECOVERY_ST
ATUS

Status of Buffer to Buffer Credit Recovery. Supported
on FC ports. Applicable values are Online, Offline, Not
Applicable, and Disable.

varchar

32

CONFIGURED_BB_SCN_CO
UNT

Configured value of Buffer to Buffer Credit Recovery
state change notification count. Range between 1 to
15.

int

NEGOTIATED_BB_SCN_COU
NT

Buffer to Buffer Credit Recovery state change
notification count value set by bcu. Range between 1
to 15.

int

TABLE 172

HBA_PORT_DEVICE_PORT_MAP

Field

Definition

Format

Size

DEVICE_PORT_ID

ID from the device_port table.

int

HBA_PORT_ID

DEVICE_PORT_ID from the hba_port table.

int

TABLE 173

HBA_PORT_FCOE_DETAILS

Field

Definition

Format

Size

DEVICE_PORT_ID

int

BANDWIDTH

The bandwidth percentage of the FCoE port eg. 10 gb
for CNA.

int

FIP_STATE

FIP (Fibre channel Initialization Protocol) state of the
port 0 – disable , 1- enabled.

varchar

64

DISCOVERY_PRIORITY

Discovery priority of the port. Currently not used.

varchar

256

TABLE 171

HBA_PORT_DETAIL

(Continued)

Field

Definition

Format

Size