Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1885)

Brocade Network Advisor SAN + IP User Manual 1813
53-1003155-01
Flow Vision interoperability with other features
44
TABLE 161 Add Flow Definition dialog box fields and options populated per Bottlenecks selection
Port selected Options and fields populated
E_Port
•
Target Switch = Selected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected port number
•
Direction = Bidirectional
Initiator
•
Target Switch = Selected port’s connected switch
•
Source Device = Initiator port ID
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected port’s connected switch port number
•
Direction = Bidirectional
Target
•
Target Switch = Selected port’s connected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = Target port ID
•
Ingress Port = Selected port’s connected switch port number
•
Direction = Bidirectional
Any port other than
E_Port, initiator, or
target port
•
Target Switch = Selected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected switch port number
•
Direction = Bidirectional