Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 847)

Brocade Network Advisor SAN + IP User Manual 775
53-1003155-01
Adapter software
19
Importing a boot image into the repository
Boot images are required for adapters that are shipped without a boot image or when it is
necessary to overwrite images on adapters that contain older or corrupted boot image versions.
1. From the Management application menu bar, select Configure > Host > Adapter Software.
2. Click the Boot Image tab.
The Boot Image Management dialog box, shown in Figure 304 , displays.
FIGURE 304 Boot Image Management dialog box
3. From the Boot Image Management dialog box, click the Repository button.
The Boot Image Repository dialog box, shown in Figure 305 , displays.
FIGURE 305 Boot Image Repository dialog box
4. Click Import on the Boot Image Repository dialog box.
5. The Import Boot Image dialog box displays.