San display settings, Setting your ficon display – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 238
168
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN display settings
5
SAN display settings
You can configure the display for FICON and reset the display to the default settings.
Setting your FICON display
FICON display setup rearranges the columns of any table that contains end device descriptions to
move the following columns to be the first columns: Attached Port#, FC Address, Serial #, Tag,
Product Type, Model, Vendor, Port Type, and WWN.
NOTE
You cannot set the FICON display for Professional and Professional Plus software.
To set the FICON display, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Display in the Category list.
The SAN Display pane displays.
SCP
Secure copy (SCP) is a means of securely
transferring computer files between a local
host and a remote host or between two
remote hosts. It is based on the Secure Shell
(SSH) protocol.
Used for firmware download.
For Fabric OS and Network OS devices, used
to collect technical support information.
For Network OS devices, used for
configuration management (backup and
restore).
For more information, refer to
“FTP/SCP/SFTP server settings”
Fabric OS
IronWare
Network OS
SFTP
Secure File Transfer Protocol (SFTP) or SSH
File Transfer Protocol is a network protocol
that provides file access, file transfer, and
file managementfunctionalities over any
reliable data stream.
Used for firmware download.
For Fabric OS and Network OS devices, used
to collect technical support information.
For Network OS devices, used for
configuration management (backup and
restore).
For more information, refer to
“FTP/SCP/SFTP server settings”
Fabric OS
Network OS
TABLE 23
Product communication protocols
Protocol
Description
Management application use
Communicates with device type