Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1236)

1164 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Viewing and editing encryption group properties
25
6. Enter the number of days to use a key before obtaining a new one, if you choose to enforce a
key lifespan. The default is Infinite (a blank field or a value of 0), which is the recommended
setting.
NOTE
The key lifespan interval represents the key expiry timeout period for tapes or tape pools. You
can only enter the Key Lifespan field if the tape pool is encrypted. If Clear Text is selected as
the encryption mode, the Key Lifespan field is disabled.
7. Click OK.
Engine Operations tab
The Engine Operations tab enables you to replace an encryption engine in a switch with another
encryption engine in another switch within a DEK Cluster environment. A DEK Cluster is a set of
encryption engines that encrypt the same target storage device. DEK Clusters do not display in the
Management application; they are an internal implementation feature and have no
user-configurable properties. Refer to
“Replacing an encryption engine in an encryption group” on
page 1088.
The Engine Operations tab is viewed from the Encryption Group Properties dialog box. (Refer to
Figure 530 .) To access the Engine Operations tab, select a group from the Encryption Center
Devices table, then select Group > Engine Operations from the menu task bar. The Properties
dialog box displays with the Engine Operations tab selected.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
You simply select the encryption engine you want to replace from the Engine list, select the
encryption engine to use for the group from the Replacement list, then click Replace.
FIGURE 530 Encryption Group Properties Dialog Box - Engine Operations Tab