Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1201)

Brocade Network Advisor SAN + IP User Manual 1129
53-1003155-01
Master keys
25
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select File as the Restore From location.
6. Enter a file name, or browse to the desired location.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.
Restoring a master key from a key vault
Use the following procedure to restore the master key from a key vault:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 376 on page 976.)
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays. (Refer to Figure 509 .)
FIGURE 509 Restore Master Key for Encryption Group dialog box - Restore from key vault
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select Key Vault as the Restore From location.
6. Enter the key ID of the master key that was backed up to the key vault.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.