Switch report – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 427
Brocade Network Advisor SAN + IP User Manual
355
53-1003155-01
Reports
7
Switch Report
The Switch Report provides a information about the selected switch and ports.
Table 31
describes the fields and components of the Switch Report. For general report content and
table functions, refer to
“Report content and functions”
TABLE 31
Switch Report fields and components
Field/Component
Description
Switch Details table
Name
The name of the switch.
WWN
The world wide name of the switch.
IP Address
The IP address (IPv4 or IPv6 format) of the physical switch.
Model
The model of the switch.
State
The state for the switch. For example, online or offline.
Operational Status
The operational status of the switch. For example, healthy, operational, degraded, marginal,
down, failed, unknown, or unreachable.
Previous Operational Status
The previous operational status of the switch.
Vendor
The vendor name.
Type
Whether the device is virtual, physical, or NPIV.
Firmware Version
The firmware version of the switch.
AG Mode
Whether or not the switch is running in AG mode.
Domain ID
The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is
the actual value on the wire.
Port Count
The number of ports on the switch.
Occupied Port Count
The number of occupied ports on the switch.
Free Port Count
The number of free ports on the switch.
Unlicensed Port Count
The number of unlicensed ports on the switch.
Initiator Count
The number of initiator ports on the switch.
Target Count
The number of target ports on the switch.
Initiator/Target Count
The number of initiator and target ports on the switch.
Unreachable Time
The date and time the switch became unreachable.
Last Update Time
The date and time when the information for the switch was last updated.
Switch Ports table
IP Address
The IP address (IPv4 or IPv6 format) of the switch port.
Switch Name
The name of the switch.
Domain ID/Port #
The domain ID for the switch and port number.
Connected Device details
The information about the device connected to this port.
Device Name
The name of the connected device.
Device Vendor
The vendor name of the connected device.
Role
The role of the connected device (such as initiator).