Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 247)

Brocade Network Advisor SAN + IP User Manual 177
53-1003155-01
Flyover settings
5
FIGURE 68 Options dialog box (Flyovers pane, Connection tab)
a. Select the protocol type (FC or IP) from the Type list, if necessary.
The default protocol is FC. Depending on which protocol you select, some properties may
not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
FC (default)
FCoE
•
Active FC4 Types
•
Address
•
Attached Port#
•
Blocked Configuration
•
Class of Service
•
Device Type
•
Fabric
•
FC Address
•
IP Address
•
Master Port #
•
Max Frame Size (bytes)
•
Name
•
Name (port)
•
Node WWN
•
Operational State
•
OS Device Name
•
Port #
•
Port Blocked Reason
•
Port State
•
Port Type
•
Port WWN
•
Speed Configured (Gbps)
•
Speed Supported (Gbps)
•
Symbolic Name
•
Supported FC4 Types
•
Zone Alias
•
Name
•
Node WWN
•
MAC
•
Port#
•
Port Type
•
FCoE Index #