Launching name server – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 647
Brocade Network Advisor SAN + IP User Manual
575
53-1003155-01
Launching Name Server
12
Note that on the FC 8 Gbps 48-port Blade, the Shared Area ports, for example, 16-47, cannot
be configured as EX_ports
NOTE
You must have Element Manager - Product Administration privileges for the selected device to
launch Web Tools. If you do not have Element Manager - Product Administration privileges, you will
need to enter those credentials to launch Web Tools. For more information about privileges, refer to
On the Connectivity Map, right-click the Fabric OS device you want to configure and select Element
Manager > Router Admin.
OR
1. Select a Fabric OS device.
2. Select Configure > Element Manager > Router Admin.
The FC Routing module displays.
NOTE
When you close the Management application client, any Web Tools instance launched from the
clients closes as well.
Launching Name Server
Use Name Server to view entries in the Simple Name Server database. You can open the Name
Server module directly from the Management application. For more information about Name
Server, refer to the Web Tools Administrator’s Guide.
NOTE
You must have Element Manager - Product Administration privileges for the selected device to
launch Web Tools. If you do not have Element Manager - Product Administration privileges, you will
need to enter those credentials to launch Web Tools. For more information about privileges, refer to
On the Connectivity Map, right-click the Fabric OS device you want to configure and select Element
Manager > Name Server.
The Name Server module displays.
OR
1. Select a Fabric OS device.
2. Select Configure > Element Manager > Name Server.
The Name Server module displays.
NOTE
When you close the Management application client, any Web Tools instance launched from the
clients closes as well.