Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1070)

998 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Steps for connecting to a DPM appliance
25
6. After the web server restarts, enter the root password.
7. Open another web browser window, and start the RSA management user interface.
You will need the URL, and have the proper authority level, user name, and password.
NOTE
The Identity Group name used in the next step might not exist in a freshly installed DPM. To
establish an Identity Group name, click the Identity Group tab, and create a name. The name
Hardware Retail Group is used as an example in the following steps.
8. Select the Key Classes tab. The key classes must be created only once, regardless of the
number of nodes in your encryption group or the number of encryption groups that will be
sharing this DPM.
kcn.1998-01.com.brocade:DEK_AES_256_XTS
kcn.1998-01.com.brocade:DEK_AES_256_CCM
kcn.1998-01.com.brocade:DEK_AES_256_GCM
kcn.1998-01.com.brocade:DEK_AES_256_ECB
a. Click Create.
b. Type the key name string into the Name field.
c. Select Hardware Retail Group for Identity Group.
d. Deselect Activated Keys Have Duration.
e. Select AES for Algorithm.
f. Select 256 for Key Size.
g. Select the Mode for the respective key classes as follows:
XTS for Key Class "kcn.1998-01.com.brocade:DEK_AES_256_XTS"
CBC for Key Class "kcn.1998-01.com.brocade:DEK_AES_256_CCM"
CBC for Key Class "kcn.1998-01.com.brocade:DEK_AES_256_GCM"
ECB for Key Class "kcn.1998-01.com.brocade:DEK_AES_256_ECB"
h. Click Next.
i. Repeat step a through step h for each key class.
j. Click Finish.