Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 195)

Brocade Network Advisor SAN + IP User Manual 125
53-1003155-01
Host discovery
3
The HCM agent default is admin. Leave this field blank for the CIM server.
11. Enter your password in the Password field.
The HCM agent default is password. Leave this field blank for the CIM server.
12. Click OK on the Add Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A host group displays in the Discovered Hosts table of the Discover Host Adapters dialog box.
The discovery status is updated dynamically.
13. Click Close on the Discover Host Adapters dialog box.
Importing Hosts from a VM Manager
To discover Hosts from a discovered VM Manager, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 54 Add Host Adapters dialog box
3. Enter a discovery request name (such as MyVMManager) in the Discovery Request Name field.
4. Select Hosts from VM Manager from the list.
5. Select All VM or an individual VM from the list.
6. Click Add.
All hosts that are part of a discovered VM Manager and have a registered host name display in
the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.