Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1098)

1026 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
25
10. Configure the KMIP server. (Refer to “Configuring the KMIP server” on page 1041.)
11. Add a secondary node to the cluster. (Refer to “Adding a node to the cluster” on page 1042.)
Setting FIPS compliance
1. From the KeySecure Management Console, select the Security tab, then select Advanced
Security, > High Security.
The High Security Configuration page displays. (Refer to Figure 397 .)
FIGURE 397 KeySecure High Security Configuration page
2. Under FIPS Compliance, set FIPS Compliance to Yes.
This ensures that only TLS 1.0 connections are supported between the Brocade Encryption
Switchswitch and the KeySecure.