Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1090)

1018 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Steps for connecting to a TEKA appliance
25
Creating a client on TEKA
This step assumes the group brocade has been created by an administrator. If the group brocade
does not exist, you must log in to TEKA as officer and create the group, then assign the group to a
manager.
1. From the Encryption Center Devices table, select a switch that needs to have a TEKA client,
then select Properties.
2. Click Key Vault User Name.
The Key Vault User Information dialog box displays. (Refer to Figure 392 .)
FIGURE 392 TEKA Key Vault User Information
3. Copy the user name in the User Name field.
4. Log in to the Thales management program as a manager who has been assigned to the
brocade group.
5. Select the Clients tab. (Refer to Figure 393 .)
FIGURE 393 TEKA Clients tab