Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2397)

Brocade Network Advisor SAN + IP User Manual 2325
53-1003155-01
Database tables and fields
I
FICON_DEBUG_FLAGS FICON_DEBUG_FLAGS for that particular tunnel.
Default value is -1. double
precision
REMOTE_WWN Configured WWN of the Remote Node. char 64
CDC CDC Flag.
Default value is 0. smallint
ADMIN_STATUS Admin Status of the Tunnel.
Default value is 0. smallint
CONTROL_L2_COS Class of service as defined by IEEE 802.1p for tunnel.
Default value is -1. int
DSCP_CONTROL DiffServe marking for control frame.
Default value is -1. int
TRUNKING_ALGORITHM Trunking Algorithm.
Default value is -1. int
EXTENDED_TUNNEL Indicates if the tunnel is an Extended Tunnel (i.e. new
Tunnel type on the switch).
Default value is 0. smallint
VIRTUAL_SWITCH_ID Refers to the virtual switch to which the tunnel record
belongs to. int
CIRCUIT_COUNT The number of circuits configured on the tunnel.
Default value is 1. smallint
MISMATCHED_CONFIG_DE
TAILS Details of the reasons as to why the tunnel is down. varchar 2048
LAST_UPDATE Last update time tells the time when the last update
to the database record happened. bigint
SLOT_NUMBER SLOT_NUMBER on which the VE Port of the tunnel
exists.
Default value is 0. int
FICON_ENABLED Is Ficon enabled. Default: 0, Values: 0|1.
Default value is 0. smallint
TPERF_ENABLED Is Tperf enabled. Default: 0, Values: 0|1.
Default value is 0. smallint
AUTH_KEY This is the preshared-key to be used during IKE
authentication. varchar 128
CONNECTED_COUNT Active connections count.
Default value is 1. smallint
TUNNEL_STATUS_STRING Tunnel Status string value from switch for the tunnel. varchar 256
COMPRESSION_MODE Compression mode value (0,1,2,3).
Default value is 0. smallint
TURBO_WRITE_ENABLED Whether turbo write (fast write) is enabled or not
(0,1).
Default value is 0. smallint
TABLE 142 FCIP_TUNNEL (Continued)
Field Definition Format Size