Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2304)

2232 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
CLI Templates
G
TABLE 55 Private VLAN – Configure VLAN as a PVLAN
Feature Description CLI Commands
VLAN To configure PVLAN type (Isolated,
community or primary) to a VLAN. interface vlan $private-vlan isolated
private-vlan community
private-vlan primary
TABLE 56 Private VLAN – Delete PVLAN configuration from VLAN
Feature Description CLI Commands
VLAN To remove PVLAN type from VLAN
interface. interface vlan $
no private-vlan
TABLE 57 Private VLAN – Associate Secondary VLAN with Primary VLAN
Feature Description CLI Commands
VLAN To associate secondary VLAN with
primary VLAN. interface vlan $
private-vlan association add
$
TABLE 58 Private VLAN – Configure PVALN mode in L2 interface
Feature Description CLI Commands
VLAN To configure Layer 2 Interface as a
PVLAN mode (host or promiscuous). interface tengigabitethernet $
switchport mode private-vlan promiscuous
switchport mode private-vlan host
TABLE 59 Private VLAN – Add native VLAN mode to PVLAN trunk
Feature Description CLI Commands
VLAN To configure native VLAN in PVLAN
trunk port. interface tengigabitethernet $
switchport private-vlan trunk native vlan $
TABLE 60 Private VLAN – Remove native VLAN from PVLAN trunk
Feature Description CLI Commands
VLAN To remove native VLAN from PVLAN
trunk port. interface tengigabitethernet $
no switchport private-vlan trunk native vlan
TABLE 61 Private VLAN – Configure normal VLAN on a PVLAN trunk
Feature Description CLI Commands
VLAN To configure normal VLANs on a
PVLAN trunk port. interface tengigabitethernet $
switchport
switchport private-vlan trunk allowed vlan all
switchport private-vlan trunk allowed vlan none
switchport private-vlan trunk allowed vlan add
$
switchport private-vlan trunk allowed vlan remove
$
switchport private-vlan trunk allowed vlan except
$