Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1381
Brocade Network Advisor SAN + IP User Manual
1309
53-1003155-01
Configuring an Allow/Prohibit Matrix manually
30
Two default configurations (Active and IPL) are displayed in a tree structure under the switch.
Existing configurations are also displayed.
3. Choose one of the following options:
•
Double-click a configuration file.
•
Select a configuration file and click the right arrow.
A matrix displays. The switch ports are displayed on both the vertical axis and horizontal axis.
An Allow icon ( ) indicates communication is allowed between the ports.
4. Click Manual Allow/Prohibit.
The Manual Allow/Prohibit dialog box displays, as shown in
FIGURE 578
Manual Allow/Prohibit dialog box
NOTE
The Manual Allow/Prohibit dialog box is only available for Fabric OS products.
5. Select one of the following options:
•
Select Allow to allow communication between two specific ports.
•
Select Prohibit to prohibit communication between two specific ports.
6. Enter the port number of the first port for which you want to allow or prohibit communication in
the Port Address 1 field.
7. Enter the port number of the second port for which you want to allow or prohibit
communication in the Port Address 2 field.
8. Click Add.
The information displays in the Selected Ports for Modification list.
To delete any of these manual configurations, select the configuration you want to delete in the
Selected Ports for Modification list and click Remove.
The Selected Ports for Modification list displays the following information:
•
Port Address 1 column — The port number of the first port for which you want to allow or
prohibit communication.
•
Port Address 2 column — The port number of the second port for which you want to allow
or prohibit communication.
•
State column — Whether you want to allow or prohibit communication.