Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2307)

Brocade Network Advisor SAN + IP User Manual 2235
53-1003155-01
CLI Templates
G
TABLE 75 VRF – Display VRF Information
Feature Description CLI Commands
VLAN To display the VRF details. show vrf detail
show vrf rbridge-id $
show vrf $
TABLE 76 IronWare OS VLAN – Remove interfaces from VLAN as untagged
Feature Description CLI Commands
VLAN To remove interfaces from the VLAN
as untagged. vlan $
no untagged ethernet $
TABLE 77 IronWare OS VLAN – VLAN Creation
Feature Description CLI Commands
VLAN To create a VLAN. vlan $
TABLE 78 IronWare OS VLAN – VLAN Deletion
Feature Description CLI Commands
VLAN To delete a VLAN. no vlan $
TABLE 79 IronWare OS VLAN – Assign interfaces to VLAN as tagged
Feature Description CLI Commands
VLAN To assign interfaces to the VLAN as
tagged. vlan $
tagged ethernet $
TABLE 80 IronWare OS VLAN – Remove interfaces from VLAN as tagged
Feature Description CLI Commands
VLAN To remove interfaces from the VLAN
as tagged. vlan $
no tagged ethernet $
TABLE 81 IronWare OS VLAN – Assign interfaces to VLAN as untagged
Feature Description CLI Commands
VLAN To assign interfaces to the VLAN as
untagged. vlan $
untagged ethernet $
TABLE 82 IronWare OS VLAN – Configure virtual routing interface
Feature Description CLI Commands
VLAN To configure a virtual routing
interface on a VLAN. vlan $
router-interface ve $
TABLE 83 IronWare OS VLAN – Enable Spanning Tree Protocol on IOS VLAN
Feature Description CLI Commands
VLAN To enable spanning tree protocol on
VLAN. vlan $
spanning-tree