Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 139)

Brocade Network Advisor SAN + IP User Manual 69
53-1003155-01
Logical chassis cluster mode discovery
3
FIGURE 14 Discover Setup - IP dialog box before removal of node
Figure 15 shows the Discover Setup - IP dialog box after the administrator has removed the node
with the IP address of 172.26.5.130 from its logical chassis cluster.
FIGURE 15 Discover Setup - IP dialog box after disabling the node from logical chassis cluster
Figure 16 shows the Discover Setup - IP dialog box after The Management application has
performed rediscovery. The node with the IP address of 172.26.5.130 is shown as a degraded link.
FIGURE 16 Discover Setup - IP dialog box after rediscovery
How the Management application handles a cluster
mode change
In Network OS release 4.0, an administrator can change the mode of a cluster from fabric cluster
mode to logical chassis cluster mode, and vice versa. For instructions, refer to the Network OS
Administrator’s Guide and the Network OS Command Reference.