Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1973)

Brocade Network Advisor SAN + IP User Manual 1901
53-1003155-01
Viewing a configuration policy manager report
47
4. Review the report details (refer to “Viewing a configuration policy manager report” on
page 1901).
To export a report, refer to “Exporting a configuration policy manager report” on page 1904.
To e-mail a report, refer to “Exporting IP reports to e-mail recipients” on page 2067.
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.
6. Click Close on the Configuration Policy Manager dialog box.
Viewing a configuration policy manager report
NOTE
You must run the configuration policy manager at least once before you can view a report.
To view an existing configuration policy manager report, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Select the policy for which you want to view a report in the Monitors list.
3. Click Report.
NOTE
If you have run this policy more than once, the latest report displays.
The Policy_Name - Configuration Policy Manager Report displays ( Figure 844 ) in a web
browser.
4. Review the report details:
• Name — Name of the configuration policy manager report.
• Date — Date and time the report was finished.
• Export button — To export a report, refer to “Exporting a configuration policy manager
report” on page 1904.
• E-Mail button — To e-mail a report, refer to “Exporting IP reports to e-mail recipients” on
page 2067.
• Status Summary — Number of checks that passed, partially failed, failed, not applicable,
or unknown.
When a policy status fails or partially fails, the status is highlighted in pink.
• Trigger — Trigger for the report. Valid results include Manual, Event Action, and Scheduled.