Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2178)

2106 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN main menus
A
Configuration File Manager— (Trial and Licensed version
Only) Select to manage device configurations from the
repository.
Schedule Backup — (Trial and Licensed version Only)
Select to schedule configuration backup.
Replicate — (Trial and Licensed version Only) Select to
replicate the switch Configuration or Security.
Task Scheduler — Select to manage deployment.
DCB — Select to manage a DCB switch, port, or link
aggregation group (LAG).
Encryption — Select to configure encryption for your SAN.
Fabric Assigned WWN — Select to configure fabric
assigned world wide names to a switch port or AG port.
Fabric Binding. (Trial and Licensed version Only) Select to
configure whether switches can merge with a selected
fabric, which provides security from accidental fabric
merges and potential fabric disruption when fabrics
become segmented because they cannot merge.
FCIP Tunnels — Select to configure tunnels and circuits on
FCIP-capable devices.
FCoE — Select to manage an FCoE port.
FICON. (Enterprise Licensed version Only) Select to
configure FICON.
Configure Fabric — Select to configure cascaded FICON
from the selected fabric.
Merge Fabrics — Select to merge the selected fabrics.
Firmware Management — Select to download firmware to
devices.
High Integrity Fabric. (Trial and Licensed version Only)
Select to activate the SCC policy, sets Insistent Domain ID
and sets Fabric Wide Consistency Policy for SCC in
tolerant mode.
Host — Select to manage a selected host.
Adapter Software — Select to launch HCM.
Adapter Ports — Select to configure Host Adapter ports.
Names — Select to provide familiar simple names to
fabrics, products, and ports in your SAN.
Port Groups — (Trial and Licensed version Only) Select to
configure a group of ports from one or more switches
within the same fabric.
Port Commissioning — Select to manage port
commissioning.
Setup — Select to configure port commissioning.
Decommission — Select to decommission an individual
port or all ports on a blade or switch.
Menu Command Command Options