Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 179)

Brocade Network Advisor SAN + IP User Manual 109
53-1003155-01
Individual IP device discovery
3
Exporting discovery reports
To export a report for a discovery profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab.
3. Select the discovery profile for which you want to export a report in the Discovery Profiles table
and click Report.
4. Choose one of the following options:
• To export the report to a .csv file, select Export > Export as CSV.
• To export the report to an HTML file, select Export > Export as HTML.
The File Download dialog box displays.
5. Click Save.
The Save As dialog box displays.
6. Browse to the file location where you want to save the report.
7. Click Save.
8. Click Close to close the Discover Setup - IP dialog box.
9. Click Yes on the confirmation message.
Viewing the discovery log
The discovery log displays the status of the current discovery activity. To configure the discovery log
size, refer to
“Defining global setting preferences” on page 86.
To view the discovery log, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab.
3. Click Discovery Log.
The Discovery Status Log dialog box displays with a list of discovery status messages. If
discovery is running, the discovery status messages automatically display and update
dynamically in the dialog box with the latest message at the top.
4. Click Close to close the Discovery Status Log dialog box.
5. Click Close to close the Discover Setup - IP dialog box.
Individual IP device discovery
Simple discovery discovers the device with a specific IP address. It is triggered by device
configuration changes on SNMP traps, certain configuration deployments to a device, and adding
device or rediscovering a device.