Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 742)

670 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Ports
14
- Area ID /Port Index — The area ID and the port index of the port.
- FC Address — The Fibre Channel address. Each FC port has both an address identifier and
a world wide name (WWN).
- Port WWN — The world wide name of the port.
- Calculated Status — The operational status. There are four possible operation status
values: Healthy, Down, Marginal, and Unmonitored.
- Status — The port’s status; for example, Enabled, Faulty, Healthy, Unknown, and so on.
- Switch Port Type — The port type; for example, E-Port, F-Port, U-port, and so on.
- Speed — The current port speed, in gigabits per second.
- Port Module — The port’s module.
- Prohibited — Whether the allow/prohibit matrix is activated.
- Blocked — Whether the selected port is blocked.
- Buffer Limited — Whether buffers are limited.
- Actual Distance — The actual distance for -end port connectivity.
- Buffers Needed/Allocated — The ratio of buffers needed relative to the number of buffers
allocated.
- Long Distance — Whether the connection is considered to be normal or longer distance.
- Switch Domain Id — The switch domain ID.
- Device Port/Switch WWN — The device port and switch world wide name.
- Device Port/Switch Name — The device port and switch name.
- Device Port/Switch State — The device port and switch state; for example, Online.
- Device Port/Switch Manufacturer — The device port and manufacturer of the switch.
- Serial # — The port’s serial number.
- Device Port / Switch Type Number — The device port and switch type number.
- Switch/Device Model — The model name and number of the device.
- Device Port/Switch Manufacturing Plant — The device port and switch manufacturing
plant.
- Device FC Address — The port FC address of the connected Host or target device.
- Device Port Type— The device port type; for example, U_Port (universal port), FL_Port
(Fabric loop port), and so on.
- Device Node WWN — The world wide name of the device node.
- Device Symbolic Name — The symbolic name of the device node.
- Physical/Virtual/NPIV — Whether the port is a physical port, a virtual port, or an NPIV_port.
- Product Type — The device type; for example, target or initiator.
- FC4 Type — The active FC4 type; for example, SCSI, FCP, and so on.
- COS — The class of service (CoS) value, which ranges between zero (low priority) and seven
(high priority).
- Port IP Address — The port’s IP address.
- Hard Address — The hard address of the device.
- Tag — The tag number of the port.
- Flag — Whether a flag is on or off.