Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 682)

610 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
LDAP server configuration
13
Select multiple roles and AORs by holding down the CTRL key and clicking more than one role
and AOR.
4. Select the AD group to which you want to assign the selected roles and AORs in the Active
Directory Groups table.
If the AD group you want does not display in the table, refer to “Loading an AD group” on
page 610.
5. Click the right arrow button.
The selected roles and AORs are moved to the Active Directory Groups table.
6. Click Apply to save your work
When you assign roles and AORs to an AD group and save the configurations, when you reopen
the Users dialog box and select the Authentication Server Groups tab, only the configured AD
group is available.
Removing roles and AORs from an AD group
To remove roles and AORs from an AD group, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click the Authentication Server Groups tab.
3. Select the roles and AORs you want to remove in the Active Directory Groups table.
Select multiple roles and AORs by holding down the CTRL key and clicking more than one role
and AOR.
4. Click the left arrow button.
The selected roles and AORs are moved to the Available Roles / AORs table.
5. Click OK to save your work.
Loading an AD group
To load an AD group, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click the Authentication Server Groups tab.
3. Click Fetch.
The Fetch AD Group dialog box displays.