Ip real-time performance monitoring, Monitoring real-time performance, Ip real-time performance – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1722: Monitoring, Ip real-time performance monitoring 0
1650
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP real-time performance monitoring
43
IP real-time performance monitoring
Real-time performance monitoring allows you to view a snapshot of current performance data. You
can enable real-time performance monitoring without configuring historical data collectors. The
data is not stored in the database. Performance monitoring allows you to define a data collector by
mapping a Management Information Base (MIB) object to a unit name (refer to
Real-time performance measures are built-in expressions. The following measures are available:
Monitoring real-time performance
If no products have been selected for real-time performance monitoring, you can select products
and data collectors by taking the following steps.
1. Select Monitor > Performance > Real Time Graphs/Tables.
The Select Sources - Real Time Graphs/Tables dialog box displays, as shown in .
Figure 743
on
page 1650.
FIGURE 743
Select Sources - Real Time Graphs / Tables dialog box
Device measures
•
Power Allocation (NS)
•
Power Allocation % (NS)
•
CPU utilization
•
Memory utilization
•
Temperature
Port measures
•
Optics
•
Power Allocation (NS)
•
Consumption (W)
•
Power Consumption %
•
Input and output utilization
•
Throughput
•
Input and output errors
•
FC Port transmit and receive utilization (VDX only)
•
FC Port transmit and receive in megabits per second (VDX
only)