Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2626)

2554 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Views
I
) TEMP_FOUNDRY_MODULE ON TEMP_MODULE.MODULE_ID =
TEMP_FOUNDRY_MODULE.MODULE_ID;
NPORT_WWN_MAP_INFO
This view provides a consolidation between Nport WWN map and AG''s N and F ports. It considers
only those N-Ports that are currently occupied that is having non-empty remote port wwn. This is
required because NPort-WWN mapping might exist for NPorts that are not yet online and if a device
is connected to AG through some F-Port that is mapped to some other N-Port that is online then
AG will use that mapping.
create or replace view NPORT_WWN_MAP_INFO as
select
NPORT_WWN_MAP.VIRTUAL_SWITCH_ID,
NPORT_WWN_MAP.N_PORT,
NPORT_WWN_MAP.DEVICE_PORT_WWN,
AG_N_PORT.REMOTE_PORT_WWN as EDGE_SWITCH_PORT_WWN,
AG_N_PORT.WWN as AG_N_PORT_WWN,
AG_F_PORT.USER_PORT_NUMBER as F_PORT,
AG_F_PORT.WWN as AG_F_PORT_WWN,
AG_F_PORT.REMOTE_NODE_WWN
from
NPORT_WWN_MAP,
SWITCH_PORT AG_N_PORT,
SWITCH_PORT AG_F_PORT,
VIRTUAL_SWITCH AG_SWITCH
where
NPORT_WWN_MAP.VIRTUAL_SWITCH_ID = AG_N_PORT.VIRTUAL_SWITCH_ID
and NPORT_WWN_MAP.N_PORT = AG_N_PORT.USER_PORT_NUMBER
and NPORT_WWN_MAP.VIRTUAL_SWITCH_ID = AG_F_PORT.VIRTUAL_SWITCH_ID
and NPORT_WWN_MAP.DEVICE_PORT_WWN = AG_F_PORT.REMOTE_PORT_WWN
AND AG_N_PORT.VIRTUAL_SWITCH_ID = AG_SWITCH.ID
and AG_SWITCH.MONITORED = 1;
PHANTOM_PORT_INFO
create or replace view PHANTOM_PORT_INFO as
select
PHANTOM_PORT.ID,
PHANTOM_PORT.WWN,
PHANTOM_PORT.VIRTUAL_SWITCH_ID,
PHANTOM_PORT.PORT_NUMBER,
PHANTOM_PORT.PORT_ID,
PHANTOM_PORT.SPEED,
PHANTOM_PORT.MAX_SPEED,
PHANTOM_PORT.TYPE,
PHANTOM_PORT.REMOTE_NODE_WWN,
PHANTOM_PORT.REMOTE_PORT_WWN,
PHANTOM_PORT.PHANTOM_TYPE,
PHANTOM_PORT.BB_FABRIC_ID,
VIRTUAL_SWITCH.WWN as VIRTUAL_SWITCH_WWN,
VIRTUAL_SWITCH.MANAGEMENT_STATE,
VIRTUAL_SWITCH.MONITORED
from
PHANTOM_PORT,
VIRTUAL_SWITCH
where