Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 412
340
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Reports
7
FIGURE 149
Add Schedule dialog box - General tab
4. Enter a unique name for the schedule in the Name field.
The name can be up to 128 characters.
5. Select the report templates that you want to include in the schedule from the Available
Templates list.
6. Click Add.
7. Select a report in the Selected Templates and Criteria list.
Depending on the reports you selected, you may need to enter parameters.
If you selected Fabric Summary Report, Zone Summary Report, or Fabric Port Report, refer to
“Selecting fabrics”
on page 341.
If you selected Switch Report, refer to
“Selecting switches”
on page 342.
8. Repeat
step 7
for each report you selected.
9. Click Next.