Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 485)

Brocade Network Advisor SAN + IP User Manual 413
53-1003155-01
Performance monitors
8
• RX Errors/sec — The number (error rate) of receive errors per second for the duration specified
in the monitor.
• RX Errors — The number (error count) of receive errors.
• TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.
• TX Errors — The number (error count) of transmit errors.
• Product — The product affected by this monitor per second.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 431.
Accessing additional data from the Top Port Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
“Application menus” on
page 2101.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
“Performance Data” on page 1601.
Top Port Link Failures monitor
The Top Port Link Failures monitor ( Figure 180 ) displays the top ports with link failures in a table.
FIGURE 180 Top Port Link Failures monitor
The Top Port Link Failures monitor includes the following data: