Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1348)

1276 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
High Integrity Fabric overview
28
NOTE
A warning message is displayed when you disable HIF mode.
To deactivate a HIF, complete the following steps.
1. Select Configure > High Integrity Fabric.
The High Integrity Fabric dialog box displays ( Figure 562 ).
2. Select the fabric on which you want to deactivate HIF from the Fabric Name list.
The HIF status displays in the High Integrity Fabric field.
3. Click Deactivate.
Deactivating HIF on a fabric does not deactivate the features on the individual switches, you
must disable the SCC policy, Insistent Domain ID, and the Fabric Wide Consistency Policy for
SCC in tolerant mode individually: