Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 544
472
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP tab overview
9
FIGURE 207
Product list toolbar
1. View list — Use to select the one of the following view types: Network Objects, IP Topology, L2
Topology, and VLAN Topology.
The areas of the main display vary depending on the display type you select.
•
Network Objects — Displays the Product List toolbar, Product List, and Master Log.
•
L2 Topology — Displays the Product List toolbar, Product List, Topology Map toolbar,
Topology Map, Master Log, and Minimap.
•
Ethernet Topology — Displays the Product List toolbar, Product List, Topology Map toolbar,
Topology Map, Master Log, and Minimap.
•
IP Topology — Displays the Product List toolbar, Product List, Topology Map toolbar,
Topology Map, Master Log, and Minimap.
•
VLAN Topology — Displays the Product List toolbar, Product List, Topology Map toolbar,
Topology Map, Master Log, and Minimap.
•
Host Topology — Displays the Host Product List toolbar, Product List, Topology Map toolbar,
Topology Map, Master Log, and Minimap.
2. Grouping type list — Use to create product and port groups, as well as edit, duplicate, and
delete groups. Only displays when you select Network Objects from the Type list.
3. Filter check box and link — Use to create a product filter based on reachability status. Only
displays when you select Network Objects from the Type list.
4. Rediscover button — Use to restart the discovery process.
1
2
3
4