Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2072)

2000 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
MAPS monitoring categories
50
FPI monitoring category
The FPI category groups areas that measures the thresholds on the performance of the fabric.
Table 184 lists measures in the FPI category and describes the measure.
TABLE 183 Traffic measures
Measure Description
Receive bandwidth usage percentage (RX) The percentage of received word frames that exceeds the configured
thresholds.
Transmit bandwidth usage percentage (TX) The percentage of transmitted word frames that exceeds the
configured thresholds.
Trunk utilization (UTIL) The percentage of utilization for the trunk at the time of the last poll.
Tx Frame Count (TX_FCNT) The number of transmitted frames for the flow that exceeds the
configured thresholds.
Rx Frame Count (RX_FCNT) The number of received frames for the flow that exceeds the
configured thresholds.
Tx Throughput (TX_THPUT) The number of transmitted words for the flow that exceeds the
configured thresholds.
Rx Throughput (RX_THPUT) The number of received words for the flow that exceeds the
configured thresholds.
IO Read Command Count (IO_RD) The number of SCSI read commands for the flow that exceeds the
configured thresholds.
IO Write Command Count (IO_WR) The number of SCSI write commands for the flow that exceeds the
configured thresholds.
IO Read Data Rate (IO_RD_BYTES) The SCSI read data rate (mbps) for the flow that exceeds the
configured thresholds.
IO Write Data Rate (IO_WR_BYTES) The SCSI write data rate (mbps) for the flow that exceeds the
configured thresholds.
TABLE 184 FPI measures
Measure Description
Device Latency Impact
(DEV_LATENCY_IMPACT) The Latency impact of the device.