Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 160)

90 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP discovery profiles
3
NOTE
DCB devices discovered through Fabric discovery (from the SAN tab) are automatically added to IP
discovery during rediscovery.
Configuring a discovery profile
NOTE
You cannot configure a discovery profile if you do not have the All IP Products AOR (area of
responsibility) in your user account.
NOTE
DCB devices discovered through Fabric discovery (from the SAN tab) are automatically added to IP
discovery during rediscovery.
To configure a discovery profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab
FIGURE 26 Profile tab
3. Click Add.
A new row (named “new_profile”) displays in the Discovery Profiles table.