Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1773)

Brocade Network Advisor SAN + IP User Manual 1701
53-1003155-01
IP sFlow configuration
43
26. Select the Identification tab. Add Report Definitions dialog box displays, as shown in
Figure 780 on page 1701.
FIGURE 780 Add Report Definitions dialog box, Identification tab
27. Enter a name for the report in the Name field. The name must be unique among all sFlow
reports, and can be a maximum of 64 alphanumeric characters.
28. Enter the report title in the Title field. The Title field supports a maximum of 128 alphanumeric
characters.
29. Select Do not share the definition if you do not want other users to see the report definition
when they log in.
30. Select Share this definition if you want other users to have read only access to the report
definition.
31. If you select Share this definition, a list of user roles displays under Available Roles. Select user
roles that you want to empower to view and run the report definition, and use the right arrow
button to move the roles to Selected Roles.
32. If you select Share this definition, a list of users displays under Available Users. Select users
that you want to empower to view and run the report definition, and use the right arrow button
to move the users to Selected Users.
Click OK to save the definition or click Run to run the report.
The Figure 781 on page 1702 shows an example report for the top five talkers shown in total
bytes for source and destination MAC addresses.