Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 907)

Brocade Network Advisor SAN + IP User Manual 835
53-1003155-01
Switch, port, and LAG deployment
20
6. When you have finished the configuration, click OK to launch the Deploy to Ports dialog box.
Refer to “Switch, port, and LAG deployment” on page 835 for more information.
Switch, port, and LAG deployment
The Deploy to Products, Deploy to Ports, and Deploy to LAGs dialog boxes provide the flexibility to
commit DCB configurations either right away or at a scheduled time. These dialog boxes also allow
you to commit the switch-level configuration changes to one or more target switches.
NOTE
Deployment from the Management application to a Network OS device is not supported.
Deploying DCB product, port, and LAG configurations
The switch, port, and LAG deployment dialog boxes provide common deployment options, save
configuration options, and schedule options. Depending on which product, port, or LAG you select,
the Deploy to Products, Deploy to Ports, or Deploy to LAGs dialog box displays upon deployment.
1. Select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a switch, port, or LAG, and click Edit.
3. Configure the switch, port, or LAG. When you have finished the configuration, click OK to
launch the appropriate dialog box. Refer to Figure 324 , Figure 325 , and Figure 326 .
FIGURE 324 Deploy to Products dialog box