Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 823)

Brocade Network Advisor SAN + IP User Manual 751
53-1003155-01
Port profiles
18
• Name Match — Compares the original profile with the profile with the same name on the
target switch.
• Network Match — Finds a profile on the target switch to provide the same networking
settings on the target switch.
NOTE
Select a column or multiple columns in the Comparison Summary list, as shown in Table 80 , and
click Remove to remove it as matching criteria. The Reference Profile column cannot be removed.
TABLE 80 Profile Comparison Summary list
Field/Component Description
Profile Properties
•
Match Type — The type of comparison criteria: MAC match, name
(profile name) match, or network match
•
Overall Match — The icon that signals if there is an exact match
(green circle icon) or a partial match (yellow triangle icon)
•
Profile Name — The profile name that is compared against the
target MAC address
•
Associated MAC Count — The number of associated MAC addresses
•
MAC Comparison — Indicates whether the compared MAC
addresses are the same or different
VLAN Settings
•
L2 Mode — The switch port mode of the port profile (access or
trunk)
•
Configuration — One of the following VLAN configuration options:
-
All — Indicates that the port profile will allow all VLAN IDs
-
None — Indicates that the port profile will not allow any VLAN
IDs
-
All Except <VLAN IDs> — Indicates that the port profile will
allow any packet except the VLAN IDs specified
-
<VLAN IDs> — Indicates that the port profile will allow any
packet with the VLAN IDs specified
•
Untagged VLAN — The port VLAN assigned to the interface as
untagged
•
Tagged VLAN Count — The number of port VLANs assigned to the
interface as tagged
•
Tagged VLAN Comparison — Indicates whether the compared
tagged VLANs are the same or different