Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2001)

Brocade Network Advisor SAN + IP User Manual 1929
53-1003155-01
Syslogs
48
FIGURE 857 Syslog Forwarding dialog box
2. Select the Enable syslog forwarding check box.
3. Click Add.
The Add Syslog Destination dialog box, shown in Figure 858 , displays. The Enable and Syslog
Repeater check boxes are selected by default.
FIGURE 858 Add Syslog Destination dialog box
4. Enter a general description of the syslog destination in the Description field.
5. Enter the IP address of the syslog destination in the IP Address field. This is a mandatory field.
IPv4 and IPv6 addresses are accepted, but a DNS name is not accepted.