Configuring isns for iscsi target discovery, Figure 5-7, Figure 5-8 – Dell Emulex Family of Adapters User Manual
Page 97
OneCommand™ Manager Application
P010066-01A Rev. A
5. Configuring Discovery
Configuring iSCSI Target Discovery
97
Configuring iSNS for iSCSI Target Discovery
An iSNS maintains a database of storage network elements that can be queried for
iSCSI targets by other hosts within the SAN. iSCSI storage devices in particular can
register targets with the iSNS for efficient discovery by iSCSI clients such as the
OneCommand Manager application.
Use the iSCSI iSNS tab to configure the iSNS server or to discover the server using
DHCP.
Figure 5-7 iSCSI iSNS Tab
To add a server:
1. Click Add iSNS Server. The Add iSNS Server dialog box appears.
Figure 5-8 Add iSNS Server Dialog Box
2. Enter the IPv4 or IPv6 address of the iSNS server and the TCP port number.
Note: On OCe14000 series adapters, an IPv4 and a IPv6 iSNS address can be added.
For other adapters, only an IPv4 address can be added.
Note: On OCe14000 series adapters, up to four iSNS servers can be added. For other
adapters, only one iSNS server can be added.