Dell Emulex Family of Adapters - Manual (Page 1358)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1358
getsessioninfo
Syntax
elxvcpcmd.exe v= u= p=
h= getsessioninfo >
Description
This command lists all session information for a specified session. You must specify the
iSCSI target name and either the TSIH of the session or the session's
ISID Qualifier and the target's IP address . These parameters
tell the command to gather the information from the specified target and session. You
can find the TSIH and ISID qualifier by running the ListSessions command.
Parameters
Note: You must specify either the TSIH value or the ISID qualifier. If ISID qualifier is
specified you must also specify the Target’s ID address.
getvpd
Syntax
elxvcpcmd.exe v= u= p=
getvpd
Description
This command shows the VPD details for the specified port on the adapter.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
MAC
The MAC address of the iSCSI port.
Target
The target’s iSCSI name enclosed in quotes (string length:11-255).
TSIH
The TSIH value of the session (value: 1-65535).
ISID_Qual
The ISID qualifier of the session (value: 0-65535).
Target_IP
The Target's IP address.