Dell Emulex Family of Adapters - Manual (Page 931)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
931
1310: Menlo Maint Mode Link up Event rcvd
The link is up in maintenance mode; only management commands are allowed.
Data: (1) fc_eventTag (2) port_state (3) vport fc_flag
Severity: Error
Log:
LOG_LINK_EVENT
Action: None required.
1312: Link Down Event received
Maintenance mode link up notification received without entering link down.
Data: (1) fc_eventTag (2) port_state (3) vport fc_flag
Severity: Error
Log:
LOG_LINK_EVENT
Action: None required.
1400: Failed to initialize sgl list.
Failed to initialize SGL list during initialization.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1401: Failed to enable pci device.
Failed to enable PCI device during initialization.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1402: Failed to set up pci memory space.
PCI initialization failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1403: Failed to set up driver resource.
Driver resource initialization failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1404: Failed to set up driver resource.
Driver resource initialization failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)