Dell Emulex Family of Adapters - Manual (Page 912)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
912
0483:Invalid link-attention link speed: x%x", bf_get(lpfc_acqe_link_speed,
acqe_link).
The link speed reported in the link attention interrupt is invalid.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Check the switch configuration.
0485: MSI-X slow-path request_irq failed ().
The request_irq kernel API has failed.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: Set module parameter lpfc_use_msi=0.
0486: MSI-X fast-path () request_irq failed ().
The request_irq kernel API has failed.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: Set module parameter lpfc_use_msi=0.
0490: MSI request_irq failed ().
The request_irq kernel API has failed.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: Set module parameter lpfc_use_msi=0.
0492: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Mailbox memory pool allocation error.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
0493: SLI_CONFIG_SPECIAL mailbox failed with status
Mailbox command failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Ensure the adapter’s firmware is current. Unload and reload the driver.
0494: Unable to allocate memory for issuing "SLI_FUNCTION_RESET mailbox
command"
Mailbox memory pool allocation error.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)