Dell Emulex Family of Adapters - Manual (Page 778)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
3. Using the OneCommand NIC Teaming and VLAN Manager
Configuring a VLAN
778
6. On the Modify VLAN ID dialog box, click OK. The changes that you have specified
appear in the Pending Changes list.
7. Click Apply.
8. Click Yes. The VLAN list is automatically updated with the changes.
Removing a VLAN during VLAN Configuration
To remove a VLAN (for a team or VLAN adapter, selected in the discovery-tree) during
VLAN configuration:
1. Click the VLANs tab.
2. Select the VLAN in the Configured VLANs table on the VLANs tab.
Note: Do not remove a team or VLAN while they are carrying traffic;
unpredictable results may occur.
3. Click Delete VLAN. The VLAN is marked for deletion.
4. Click Apply to delete the VLANs.
5. Click OK.