Dell Emulex Family of Adapters - Manual (Page 470)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
3. Adapter Management Utility Command Line Interface
Force Boot Code (/fb)
470

For each installed and supported adapter, forces a download of firmware and
boot code using the versions specified in the fwmatrix.txt file.
FC Adapter Download Summary
HBA=, Port Type=, WWN=,
Update=, Image=, New=,
Old=, Status=
FCoE Adapter Download Summary
HBA=, Port Type=, WWN=,
Update=Firmware, Image=, New=, Old=,
Status=
iSCSI and NIC-only Adapter Summary:
HBA=, Port Type=, MAC=,
Update=Firmware, Image=, New=, Old=,
Status=
Return Code=
where is Success or Error, and = 0 for completion with no errors or a
non-zero error code for any error.
Notes:

FCoE, iSCSI, and NIC-only adapters require a system reboot to activate new
firmware.

If the preview switch is used, the Status= field displays
“Preview.”
Force Boot Code (/fb)
Usage: /fb
The force boot code switch forces a boot code download to an adapter regardless of the
boot code version installed on the adapter, and of any additional operational switches
given on the command line.
Example usage:
./elxflash /fb /auto – Forces a boot code download using auto-discovery.

The fwmatrix.txt file is ignored. You must place the desired versions of boot
code in the boot directory.