Dell Emulex Family of Adapters - Manual (Page 1224)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
iSCSI Port
1224

PCI Bus Number – The PCI bus number to which the port is mapped.
TCP/IP Info Area

DHCP Enabled – The DHCP authentication status of the selected port.

IP Address – The IP address for the NIC port.

Subnet Mask – The subnet mask for the NIC port.

Gateway Address – The gateway address for the NIC port.

VLAN Enabled – The VLAN enabled state for the iSCSI interface.

VLAN ID – The VLAN identifier to use, from 0 to 4094 (only valid when VLAN
is enabled). A value of 0 indicates the VLAN is disabled.

VLAN Priority – The VLAN priority for the iSCSI interface.
Network Info Area

Link Status – The status of the link on the selected port.

LinkDown Reason - The reason for the status of LinkDown on the selected port.

Port Speed – The current port speed of the iSCSI port.

Min Bandwidth – The minimum SoftCap bandwidth assigned.

Max Bandwidth – The maximum SoftCap bandwidth assigned.
Enabling iSCSI Boot
To enable iSCSI boot:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the iSCSI port for which you
want to view information.
3. To enable iSCSI boot, check Enable iSCSI Boot. To disable iSCSI boot, clear Enable
iSCSI Boot.
Viewing PCI Registers for an iSCSI Port
The PCI Registers tab contains PCI information about the selected iSCSI port.
To view PCI registers for an iSCSI port:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the iSCSI port for which you
want to view PCI information.
3. Select the PCI Registers tab.