Dell PowerVault TL2000 - Manual

Page 1
Dell™ Model TL2000/TL4000 1GB
iSCSI to SAS bridge iSCSI initiators
Table of Contents
Install the iSCSI Initiator Software (iSCSI-attached Host Servers Only).......................................3
Installing the iSCSI Initiator on a Windows Host Server............................................................3
Installing the iSCSI Initiator on a Linux Host Server..................................................................3
Installing the iSCSI initiator during RHEL 4 installation .........................................................3
Installing the iSCSI initiator after RHEL 4 installation: ...........................................................3
Installing the iSCSI Initiator on a RHEL 5 System.....................................................................4
Installing the iSCSI initiator during RHEL 5 installation: ........................................................4
Installing the iSCSI initiator after RHEL 5 installation: ...........................................................4
Installing the iSCSI initiator after RHEL 5 installation via the command line: ........................4
Installing the iSCSI Initiator on a SLES 9 System .....................................................................4
Installing the iSCSI initiator during SLES 9 installation:.........................................................4
Installing the iSCSI initiator after SLES 9 installation:............................................................4
Installing the iSCSI Initiator on a SLES 10 SP1 System ...........................................................5
Install the iSCSI initiator during SLES 10 SP1 installation:....................................................5
Installing the iSCSI initiator after SLES 10 SP1 installation:..................................................5
Perform Target Discovery from the iSCSI Initiator ........................................................................5
Using Windows Server 2003 or Windows Server 2008 GUI version.........................................5
Using Windows Server 2008 Core Version ...............................................................................6
Using Linux Server ....................................................................................................................6
Using RHEL 5 or SLES 10 SP1 ................................................................................................6
Configure CHAP Authentication on the Host Server (optional).....................................................7
Using Windows Server 2003 or Windows Server 2008 GUI version.........................................7
Using Windows Server 2008 Core Version ...............................................................................7
Using Linux Server ....................................................................................................................8
If you are using RHEL 5 or SLES 10 SP1 .................................................................................8
If you are using SLES10 SP1 via the GUI .................................................................................8