Dell Emulex Family of Adapters - Manual (Page 1198)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
FC and FCoE Ports
1198
FC Port Details Tab Field Definitions
Port Attributes Area

Port WWN – The port World Wide Name of the selected adapter.

Node WWN – The node World Wide Name of the selected adapter.

Fabric Name – The Fabric Name is a 64-bit worldwide unique identifier
assigned to the fabric.

Boot Version – The version of boot code installed on the selected adapter port. If
the boot code is disabled, the field shows “Disabled”.

Port FCID – The FC ID of the selected adapter port.

PCI Function – The PCI function number of the selected port.

PCI Bus Number – The PCI bus number.

Driver Version – The version of the driver installed for the adapter.

Driver Name – The executable file image name for the driver as it appears in the
Emulex driver download package.

Firmware Version – The version of Emulex firmware currently active on the
adapter port.

Discovered Ports – The number of mapped and unmapped ports found during
discovery by the Emulex adapter driver. The mapped ports are targets and the
unmapped ports are non-targets such as switches or adapters.

Port Type – The current operational mode of the selected adapter’s port.

OS Device Name – The platform-specific name by which the selected adapter is
known to the operating system.

Symbolic Node Name – The FC name used to register the driver with the name
server.

Supported Class of Service – A frame delivery scheme exhibiting a set of
delivery characteristics and attributes. There are three classes of service.

Class 1 provides a dedicated connection between a pair of ports with
confirmed delivery or notification of non-delivery.

Class 2 provides a frame switched service with confirmed delivery or
notification of non-delivery.

Class 3 provides a frame switched service similar to Class 2 but without
notification of frame delivery or non-delivery.

Supported FC4 Types – A 256-bit (8-word) map of the FC-4 protocol types
supported by the port containing the selected adapter.
Port Status Area
The Link Status field indicates the status of the link on the selected adapter port.
FC Port Details Tab Buttons
The Enable Port/Disable Port button toggles between Disable Port and Enable Port,
depending upon the current status of the physical port.