Dell Emulex Family of Adapters - Manual (Page 773)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
3. Using the OneCommand NIC Teaming and VLAN Manager
Restoring a Configuration
773
Restoring a Configuration
Restores from a saved configuration. Use the browse dialog box to select a saved
configuration and click Open. A Confirmation Restoration message warns you that the
current teaming configuration will be erased. Click Yes on the message to proceed.
To restore a configuration from a saved configuration
1. Access the Confirm Restoration dialog box one of these ways:

From the toolbar, click Restore.

From the menu bar, select Tools>Restore Current Configuration.

With the host computer selected in the discovery-tree, click Restore on the
General tab.
2. The Confirm Restoration dialog box is displayed. Click Yes to proceed. The Open
browse dialog box is displayed.
Figure 3-13 Browse Dialog Box to Restore a Configuration
3. Use the Open browse dialog box to locate a configuration and click Open.
Configuring a VLAN
Note: The following notes apply to configuring a VLAN for an adapter and team.

Configuring the VLAN at both the physical and team level is not supported.