Restart the necessary services, Pxe client setup, Figure c-18 – Dell Emulex Family of Adapters User Manual

Page 1751

Text mode
Original mode

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual

P010097-01B Rev. A

Appendix C. Examples for Configuring and Booting UEFI NIC

UEFI NIC IPv6 PXE Setup Procedure for SLES11 SP2

1751

write_enable=YES

listen=NO

listen_ipv6=YES

Restart the Necessary Services

Service nfsserver restart

Service xinetd restart

Service vsftpd restart

Service dhcpd6 restart

PXE Client Setup

To set up the PXE client:
1. Boot the server and press to enter system setup.
2. Select System BIOS Settings > Boot Settings and change boot mode to UEFI.
3. Reboot the server.
4. Press to enter system setup.
5. Select System BIOS Settings > Boot Settings > UEFI Boot Settings and set the UEFI

PXE boot protocol to IPv6.

Figure C-18 UEFI Boot Settings Screen

6. Reboot the server.