Dell Emulex Family of Adapters - Manual (Page 1377)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1377
Description
This command sets the priorities for a priority group. The values must be set according
to the following rules:

The priorities range from 0 to 7.

The priority group IDs (PGID) range from 0 to 7.

A priority can exist in only one priority group.

All priorities must appear once in any of the eight (PG0-PG7) priority groups.

Each set of priorities for a group must be separated by a space.

Specify multiple priorities for the same group by a comma-separated list.

To specify none, use - for the argument.

The same priority values cannot be specified to different groups.

All priorities (0 to 7) must be assigned to some PGID.

Not all PGIDs must be assigned a priority.

Not all adapters support two PFC priorities and eight priority groups. For
adapters, if you exceed the PFC priorities or priority groups an error message
appears.
FCoE Adapter Specific Rules:

Minimum of one and a maximum of two PFC priorities can be configured.

One of the PFC priorities must match FCoE priority.

The additional PFC priority must be assigned to a priority group which has no
other priorities.

The FCoE priority must be assigned to a priority group which has no other
priorities.
iSCSI Adapter Specific Rules:

Minimum of one and a maximum of two PFC priorities can be configured.

One of the PFC priorities must match iSCSI priority.

The additional PFC priority must be assigned to a priority group which has no
other priorities.

The iSCSI priority must be assigned to a priority group which has no other
priorities.
NIC Adapter Specific Rules:

Only one PFC priority can be configured.

The PFC priority must be assigned to a priority group which has no other
priorities.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.