Dell Emulex Family of Adapters - Manual (Page 153)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
FC/FCoE
153
Setting an Adapter Parameter Value to the Host Adapter
Parameter Value
To set an adapter parameter value to the corresponding host parameter value:
1. Select Host or Fabric view.
2. In the discovery-tree, select the adapter port.
3. Select the Driver Parameters tab.
4. Click Globals. All parameter values are now the same as the global, or host, values.
5. To apply the global values, click Apply.
Saving Adapter Driver Parameters to a File
To save a desired adapter parameter configuration click Save. To apply your
configuration changes, click Apply.
Note: OneCommand Manager application Web Launch Interface driver parameters
files are saved on the host that the browser was launched from, not the host IP
specified in browser.
Each definition is saved in a comma-delimited file with the following format:
=
The file is saved in the Emulex Repository directory.

In Windows: \Program Files\Emulex\Util\Emulex Repository or
\Program Files (x64)\Emulex\Util\Emulex Repository for any x64 systems

In Linux: /usr/sbin/ocmanager/RMRepository

In VMware ESXi: /tmp/RMRepository

In Solaris: /opt/ELXocm/RMRepository
The OneCommand Manager application can then use the Batch Driver Parameter
Update function to apply these saved settings to any or all compatible adapters on the
SAN.
Note: Host driver parameters and persistent binding settings cannot be saved.