Dell Emulex Family of Adapters - Manual (Page 103)

OneCommand™ Manager Application P010066-01A Rev. A
5. Configuring Discovery
Configuring iSCSI Target Discovery
103

Xmt Data Octets – The count of data octets that were transmitted by the local
iSCSI node on this session.

Recv Data Octets – The count of data octets that were received by the local iSCSI
node on this session.

Digest Errors – The count of PDUs that were received on the session and
contained header or data digest errors.

Connection Timeouts – The count of connections within this session that have
been terminated due to a timeout.

Session Target Alias – The target alias for the session.
Connection Information Area

iSCSI Connection ID – The iSCSI Connection ID assigned to the connection.

Status – The status of the connection. Valid values are connected and unknown.

Source IP Address – The source IP address for the connection.

Source Port – The source TCP port number for the connection.

Destination IP Address – The destination IP address for the connection.

Destination Port – The destination TCP port number for the connection.

Redirected Destination – The redirected IP address for the target.

Redirected Destination Port – The redirected port number for the target.
Connection Negotiated Login Options

Authentication Method – The authentication method used for connection. Valid
values are None, Mutual CHAP and One-Way CHAP.

MaxRecdDataSegmentLength – The maximum data segment length in bytes an
initiator or target can receive in an iSCSI PDU.

Header Digest – When set to CRC32C, the integrity of an iSCSI PDU's header
segments is protected by a CRC32C checksum.

Data Digest – When set to CRC32C, the integrity of an iSCSI PDU's data
segments is protected by a CRC32C checksum.

TCPMSS – The maximum segment size for this connection. The driver uses this
to determine the size of the data PDU whenever it is required to transmit the
entire PDU with a single iSCSI header.